DTE-3120 - Networked DVB-ASI Input Adapter (ASI to IP Converter)

DTE-3120 Features

• Standalone module can either be used as compact autonomous ASI to TSoIP gateway, or as remote I/O device for PC-based applications
• SMPTE-2022 and DTAPI mode
• Time stamping for monitoring applications
• Power-over-Ethernet support: No separate power feed required
• Active loop-through with fail-over relays for input-to-output connection in case of power failure
• Supports IP encapsulation and 2D FEC encoding according to SMPTE 2022-1/2
• SNMP agent
• LCD status display shows device identifier, bitrate, IP/MAC address and status
• Uniform software access to DekTec TSoIP-, PCI- and USB devices through DTAPI
• Install up to 14 modules in 3U 19” rack space using the DekTec rack-mountable rail, or units can be mounted on a DIN rail directly on a wall

 DTE-3120 Applications

• Autonomous DVB-ASI to IP gateway
• With DTE-3100: Tunnelling of ASI signals over LAN, WAN or the Internet
• Remote DVB-ASI input adapter for server-based analysers, monitoring applications (Xpect),  multiplexers and similar systems

DTE-3120 Key Attributes

CONTROL

 AVAILABLE OPTIONS

1.  DtTV - MPEG-2 Transport Stream Television Software

 DtTV Features

• Live decoding of any unscrambled  service within a transport-stream
• Intuitive user interface, enabling easy switching between services (zapping), controlling audio volume and brightness level and selection of an input device
• Decoding of multiple television services in parallel, for creating a mosaic
• Quarter-resolution decoding mode for using less processor cycles per decoded picture
• Decoding of MPEG-1/2, AC3 audio
• Decoding of  MPEG-4 part 10 / H.264, MPEG-1/2/4, SD/HD,
• Decoding of HD video (high-end processor and graphics card required)

 DtTV Applications

• Demonstrations where a decoded  picture is required
• Mosaic generation
• Quick verification of the services available in a transport-stream

2.  DtGrabber+ - Transport Stream / SDI Advanced Recorder

 DtGrabber+ Features

• Recording of MPEG-2 Transport-Streams or SDI signals
• Multi-file functions:
  - Erase files older than X hours
  - Maximum number of files
  - Time stamp/index in filename
• Merge tool for combining several files
• Remote monitoring and control through SNMP
• Select PIDs to record, with range support, positive/negative filtering
• Record to a single file, to multiple files or “looped”: continuous recording of the last X seconds/minutes/hours or MB
• SDI recording: 8 or 10 bits, full frame or video only, Huffman compression on/off
• Disk-space monitoring

 DtGrabber+ Applications

• General-purpose capturing tool
• Advanced recorder solutions
• Archiving of broadcast signals

3. StreamXpert - Transport Stream Analyser Software

 StreamXpert Features

• Real-time analysis, monitoring and recording of MPEG-2 transport streams
• Provides detailed statistics on the PIDs, services and tables found in the transport stream
• User definable TR 101 290 templates
• PCR analysis
• PID grid: compact overview of all PIDs
• Integrated video and audio decoder with support for MPEG-2/H.264 video streams and AC3 audio
• Deep decoding of PSI, DVB-SI, DVB-RCS and ATSC-PSIP tables and descriptors
• Supports DVB-RCS tables: SCT, FCT, SPT, CMT, TBTP, RMT tables and common DVB-RCS descriptors
• Support for decoding of custom descriptors and tables with a user-defined XML template file

  StreamXpert Applications

• The world's most cost-effective and user-friendly transport-stream analyser
• Test and validation of equipment with transport-stream output
• Quality monitoring of MPEG-2 transport streams in studios, head ends, etc.

ORDERING INFORMATION

DTE-3120   -  Networked ASI input Adapter (ASI to IP Converter)

DTE-3120-DP - DTE-3120 with DtTV and DTGrabber+

DTE-3120-SX - DTE-3120 with DtTV, DTGrabber+ and StreamXpert


Pairing Networked ASI output Adapter (IP to ASI Converter)  -  DTE-3100