H.264 (MPEG-4 AVC) & MPEG-2 HD/SD Integrated Receiver Decoder





  • Model: BE-IRD-5502
  • Manufacturer: Telairity


$2,995.00 USD


Add to Cart:

BE-IRD-5502 - H.264 & MPEG-2 HD/SD Integrated Receiver/Decoder

The BE-IRD-5502 is a versatile broadcast-class H.264/AVC (MPEG-4) HD/SD integrated receiver and decoder for broadcasters, cable operators, and telecoms. A highly flexible professional choice, the 5502's ability to decode all video formats (HD or SD, MPEG-2 or MPEG-4 (H.264/AVC)), together with its wide choice of input options, makes it the perfect solution for customers migrating from MPEG-2 SD to MPEG-4 (H.264/AVC) HD. A built-in Multiplexer/Filter allows users to create highly customized output transport streams. Two PCMCIA Common Interface card slots support a variety of Conditional Access systems, including Conax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viacross, and others. LAN control and monitoring can done using the unit's built-in Monitor Center facility, or through standard SNMP-based network management systems.

Features

  • Compact 1RU system for broadcast quality video decoding
  • Part of the Telairity family of professional video compression products for trouble-free integration with Telairity encoders.
  • Decodes all 4:2:0 video formats: HD & SD, MPEG-2 & H.264/AVC
  • HD to SD down-conversion; Convert DVB to/from IP; Convert other TS formats to DS3
  • QPSK, QAM, and COFDM input interfaces with error correction
  • DVB-S, -S2, -T, -C RF input with loop-out; DS3 input over 75ohm cable with loop-out; IP input
  • 2 CI slots to accommodate a variety of CA systems; Supports BISS 1, BISS E descrambling
  • IP, ASI, SDI, HDMI, Component, and Composite video outputs
  • Decodes 2 audio stereo pairs with embedded, analog and digital output; AC3 pass-through supported
  • Built-in multiplexer/filter for highly customized output transport streams
  • Teletext, VBI, EBU and DVB subtitles; WSS and Closed Caption
  • Auto-saves settings on power loss
Specifications

QPSK / 8PSK Demodulation (complies with DVB-S, MPEG-2, ETSI 300421 standards)

Input frequency range:           950~2150MHz
Input Level:                           -25dBm~65dBm
Input Impedence:                   75Ω, F type female connector
Symbol Rate:                         2~45Mb/s (SCPC or MCPC)
Rolling Off Factor:                   0.35 for QPSK; 0.35, 0.25, 0.2 for DVB-S2
Punctured Rates:                    1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 for DVB-S QPSK   
                                             3/5, 2/3, 3/4, 5/6, 8/9, 9/10 for DVB-S2 8PSK
LNB Level:                              0, 13V, 18V adjustable
Reed Solomon Error Correction:        204, 188, T = 8 & I = 12

DVB-C QAM Demodulation

Tuner
Input Symbol Rate Range:            1~7Mbps (PAL), 1~6Mbps (NTSC)
Demodulation:                              16/32/64/128/256QAM
Bandwidth:                                   6, 7, 8MHz

Input
Frequency Range:                        48~860MHz
Digital Signal Input Level:            -15~15dBmV
Input Impedance:                         75Ω, IEC Female (7/8MHz) or F Female (6MHz) Input

DVB-T COFDM Demodulation (complies with DVB-T & MPEG-2 standards)

Tuner
Input Symbol Rate Range:           4.98~31.67Mbps (8MHz bandwidth)
Demodulation:                             QPSK, 16 QAM, 64 QAM
Bandwidth:                                  6, 7, 8MHz
FFT Mode:                                 2K/8K
Guard Interval:                            1/4, 1/8, 1/16, 1/32, off
FEC Code Rate:                         1/2, 2/3, 3/4, 5/6, 7/8

Input
Frequency Range:                       470-862MHz (UHF), 174-230MHz (VHF)
Digital Signal Input Level:           -20~-70dBmV

Input Impedence:                       75Ω, IEC Female (7/8MHz) or F Female (6MHz) Input


DS3 Input & Loop-through Output (compatible with Barco, Huawei, etc. protocols)

Impedence:                                 75Ω
Connector:                                  BNC
Maximum Input Code Rate:         44.736Mbps

Format:                                      Unframed Framing according to G.804 / G.752 (DS3)

TS over IP Output

10/100base-T:                              RJ45
Maximum Output Code Rate:       70Mbps 
UDP/RTP:                                   Multicast or Unicast
Multicast Control Protocol:           IGMPV2

Input Connectors

  • 1 IP input – RJ45 connector (shared with output)
  • 1Ethernet management port – RJ45 connector
  • 2 ASI – BNC connectors
  • 1 RF Tuner
Output Connectors
  • 1 IP output – RJ45 connector (shared with input)
  • 1 RS-232 printing port
  • 4 ASI -- BNC connectors
  • 2 SDI – BNC connectors
  • 1 HDMI
  • 1 component video – Y Pb Pr set of RCA connectors
  • 2 composite video – 1 RCA connector, 1 BNC connector
  • 2 L/R stereo pairs – RCA connectors
  • 2 DB-9 connectors for 2 AES/EBU and 2 analog XLR audio stereo pairs
  • 1 RF Tuner loop-out
Physical Specifications
Input voltage:                            AC 90V~260V, 50/60Hz
Dimensions & Weight:              1RU(H) /19(W)x10(L)in / 483(W)x255(L)mm 11lbs/5Kg
Operating Conditions:               Temperature 0~45°C; Humidity < 95%
Storage Temperature:               20~70°C





 Copyright © 2012 AdvancedDigital Inc.