ORX 1800 – 3Gbit Fiber Optic to SDI Receiver
- Power Supply
- Mounting Brackets
- Plastic Transport Case
- Warranty Registration Card (2 years)
1. LC/ST Sim: LC Connector to ST Connector Adapter Kit.
This option allows the use of an ST fiber connection to the OTX 1810 and includes a 0.5m (19.6″) tail (SMF) and 1 x ST/ST sex changer adapter. Adapter cable introduces less than 0.25dB attenuation.
2. LC/SC Sim: LC Connector to SC Connector Adapter Kit.
This option allows the use of an SC fiber connection to the OTX 1810 and includes a 0.5m (19.6″) tail (SMF). Adapter cable introduces less than 0.25dB attenuation.
3. P-TAP 1000: P-TAP Battery Adapter Cable
This option allows the yellobrik to be powered from a battery with a standard P-TAP power connection. Cable length 1.8m
4. XLR-1000: 4 Pin XLR Camera Battery Adapter Cable
This option allows the yellobrik to be powered from a camera battery with a standard 4 pin XLR power connection. Cable length 1.8m
- SDI video support up to 3Gbit/s (1080p60)
- Error free optical reception
- 1260nm to 1620nm wavelength input range
- Sensitivity -3dBm to -19dBm
- LC/UPC optical input connection
- Supports hot swapping and hot plugging
The ORX 1800 is a compact fiber optic receiver designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.
When paired with the fiber optic transmitter (Yellobrik OTX 1810 or OTX 1840) this module provides a very cost effective optical transmission / receiver system for signals up to 1080p60 (3Gbit/s) preserving full uncompressed quality.
The ORX 1800 is compatible with any video signal according to SMPTE 424M, SMPTE 292M and SMPTE 259M standards as well as DVB-ASI.
1 x ﬁber optic Input
Simplex (Singlemode) using LC/UPC Connector
SMPTE 297M – 2006
Input range (wavelength) 1260nm to 1620nm
RX sensitivity -3dBm to -19dBm
RX active LED on side of module
1 x SDI video on 75 Ohm BNC connector
SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
Multi-standard operation from 270Mbit/s to 3Gbit/s
Return Loss: > 15dB to 1.5GHz and > 10dB up to 3GHz
Power +12VDC power supply (included)
( supports external power input from 9 – 14 VDC )
Power LED on side of module
Size 105mm x 40mm x 22mm ( 4.13” x 1.57” x 0.86”)
Model # ORX 1800
Includes Module, 12V DC power supply and wall mounting
brackets (ﬁber optic cable not included)