OTR 1810 – 3Gbit Fiber Optic / SDI Transceiver – 10km
- Supports SDI video up to 3Gbit/s (1080p60)
- Optical receiver and transmitter in single package
- Reclocking 270Mbit – 1.5Gbit – 3Gbit auto-detect
- Transmitter: 1310nm -5dBm
- Receiver: 1260nm to 1620nm -3dBm to -19dBm
- Error free optical connections
- Up to 10Km (6.2 miles) @ 3Gbit/s Singelmode
- LC/UPC dual optical connection
- Supports hot swapping and hot plugging
The OTR 1810 is a Fiber Optic to SDI transmitter and receiver combined in a compact self contained package. This is a convenient and cost effective solution to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.
Each OTR 1810 transceiver has an independent transmitter and receiver channel which provides an effective solution for any SDI signal up to 1080p60 (3Gbit/s) while preserving full uncompressed quality.
The OTR 1810 will auto-detect any connected video signal from 270Mbit/s to 3Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M standards as well as DVB-ASI.
- Power Supply
- Mounting Brackets
- Plastic Transport Case
- Warranty Registration Card (2 years)
LC/ST Dup: LC Connector to ST Connector Adapter Kit.
This option allows the use of ST fiber connections on the OTR 1840 and includes a 0.5m (19.6″) tail (SMF) and 2 x ST/ST sex changer adapter. Adapter cable introduces less than 0.25dB attenuation.
LC/SC Dup: LC Connector to SC Connector Adapter Kit.
This option allows the use of SC fiber connections on the OTR 1840 and includes a 0.5m (19.6″) tail (SMF). Adapter cable introduces less than 0.25dB attenuation.
P-TAP 1000: P-TAP Battery Adapter Cable
This option allows the yellobrik to be powered from a battery with a standard P-TAP power connection. Cable length 1.8m
XLR-1000: 4 Pin XLR Camera Battery Adapter Cable
This option allows the yellobrik to be powered from a camera battery with a standard 4 pin XLR power connection. Cable length 1.8m
1 x SDI video input
1 x SDI Video output
75 Ohm BNC connectors
SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
Multi-standard operation from 270Mbit/s to 3Gbit/s
Multi-rate reclocking 270Mbit/s – 1.48Gbit/s – 3Gbit/s
Return Loss: > 15dB to 1.5GHz and > 10dB up to 3GHz
Automatic cable EQ (Belden 1694A cable) 250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
1 x ﬁ ber optic input
1 x ﬁ ber optic output
Duplex (dual single mode) using LC/UPC Connections
SMPTE 297M – 2006
Transmitter: 1310nm (-5dBm)
Receiver: 1260nm to 1620nm (-3dBm to -19dBm)
TX active LED, and RX active on side of module
Singlemode transmit / receive (duplex connector)
Max. distance 10Km (6.2 miles) @ 3Gbit/s (Singlemode)
Power +12VDC power supply (included)
( supports external power input from 9 – 14 VDC )
Power LED on side of module
Size 105mm x 40mm x 22mm (4.13” x 1.57” x 0.86”)
Model # OTR 1810