OTX 1840 – 3Gbit SDI to Fiber Optic Transmitter – 40km
OTX-1840 (Non CWDM) – 3GBit SDI to Fiber Optic Transmitter, 1550 nm, Non CDMA
OTX-1840 (CWDM) – 3GBit SDI to Fiber Optic Transmitter, CDMA, Select wavelength from: 1270,1290,1310,1330,1350,1370,1390,1410,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610nm
- Power Supply
- Mounting Brackets
- Plastic Transport Case
- Warranty Registration Card (2 years)
1. LC/ST Sim: LC Connector to ST Connector Adapter Kit.
This option allows the use of an ST fiber connection to the OTX 1810 and includes a 0.5m (19.6″) tail (SMF) and 1 x ST/ST sex changer adapter. Adapter cable introduces less than 0.25dB attenuation.
2. LC/SC Sim: LC Connector to SC Connector Adapter Kit.
This option allows the use of an SC fiber connection to the OTX 1810 and includes a 0.5m (19.6″) tail (SMF). Adapter cable introduces less than 0.25dB attenuation.
3. P-TAP 1000: P-TAP Battery Adapter Cable
This option allows the yellobrik to be powered from a battery with a standard P-TAP power connection. Cable length 1.8m
4. XLR-1000: 4 Pin XLR Camera Battery Adapter Cable
This option allows the yellobrik to be powered from a camera battery with a standard 4 pin XLR power connection. Cable length 1.8m
- Supports SDI video inputs up to 3Gbit/s (1080p60)
- Reclocking at 270Mbit – 1.5Gbit – 3Gbit (auto-detect)
- Error free optical transmission
- Up to 40Km (24.8 miles) @ 3Gbit (Singlemode)
- LC/PC optical connection
- CWDM with 18 selectable wavelength
- Supports hot swapping and hot plugging
The OTX 1840 is a compact SDI to fiber optic transmitter designed to combat the restrictions involved with the distribution of uncompressed broadcast quality video signals over long distances.
When paired with the fiber optic to SDI receiver (Yellobrik ORX 1800) this provides a very cost effective optical transmission / receiver system for signals up to 1080p60 (3Gbit/s) preserving full uncompressed quality.
Select from 18 wavelengths for full CWDM compatibility [1270 – 1610nm].
The OTX 1810 will auto-detect any connected video signal from 270Mbit/s to 3Gbit/s according to SMPTE 424M, SMPTE 292M and SMPTE 259M standards as well as DVB-ASI.
1 x SDI video on 75 Ohm BNC connector
SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
Multi-standard operation from 270Mbit/s to 3Gbit/s
270Mbit/s – 1.48Gbit/s – 2.97Gbit/s
Return Loss: > 15dB to 1.5GHz and > 10dB up to 3GHz
Automatic cable EQ (Belden 1694A cable)
250m @ 270Mbit/s, 140m @ 1.5Gbit/s, 80m @ 3Gbit/s
1 x ﬁber optic output
Simplex (single mode) using LC/UPC Connector
SMPTE 297M – 2006
TX active LED on side of module
Max. distance 40Km (24.8 miles) @ 3Gbit/s (Singlemode)
+12VDC power supply (included)
( supports external power input from 9 – 14 VDC )
Power LED on side of module
105mm x 40mm x 22mm (4.13” x 1.57” x 0.86”)
Module, 12V DC power supply, wall mounting
brackets and plastic transport case