DTE-3114 – Networked Quad QAM Modulator

Model: DTE-3114 Manufacturer: DekTec
This Product Qualifies for Free Global Shipping!

$1,470.00 USD

In Stock

Description

All USA orders will be shipped from our USA warehouse.
All other orders will be shipped from Canada.

ORDERING INFORMATION

DTE-3114   –   Networked Quad QAM Modulator

DTE-3114 Features

  • Standalone four-channel QAM modulator with TS-over-IP (TSoIP) inputs and directly synthesized VHF/UHF outputs
  • Web and SNMP interface for setting parameters and observing status
  • Unit can be powered via the Ethernet cable (Power over Ethernet) or through a DC power supply jack
  • Supports IP de-encapsulation and 2D FEC decoding according to SMPTE 2022-1/2
  • Removal of IP jitter with programmable size of jitter-tolerance buffer
  • LCD status display shows device identifier, bitrate, IP/MAC address and status
  • Install up to 12 modules in 3U 19″ rack using the DekTec rack-mountable rail, or units can be mounted on a DIN rail directly on a wall

Powering options

  • Through the Ethernet cable using:
    – IEEE 802.3af compatible PoE switch
    – PoE Midspan solution, e.g. 3COM 3CNJPSE
  • With DTE-PWR1 power adapter (included)

 DTE-3114 Limitations

  • Channels must be grouped: overall spectrum of the DTE-3114 cannot be wider than 32MHz
  • All channels must operate in the same mode and with the same symbol rate 
  • Not supported:
    – Scrambling of incoming Transport Streams
    – SPTS-to-MPTS multiplexing
    – VBR input streams

 DTE-3114 Applications

  • Small-scale CATV networks
  • Cable-network simulator
  • QAM test-signal generator

KEY ATTRIBUTES

Main RF port: 

Connector    75-Ω F Female

Output level (total)  -32 .. -9dBm

Level accuracy  ±1dB

Monitor port: 

Connector  75-Ω F Female

Output level (total)  -25.5±3dBm

RF: 

Range    32 .. 1006MHz

Channel spacing  5 .. 8MHz

Symbol rate   4.48 .. 7.0MBd

MER  43dB

GigE port:

Physical layer  IEEE 802.3af

Connector    RJ-45

Transport:

TP per IP  1 .. 7

Encapsulation  UDP or RTP

FEC   SMPTE 2022-1

Jitter tolerance range:   1 .. 120 ms

MODULATION

QAM-A    EN 300 429 (DVB-C)

QAM-B   J.83 Annex B with support for all interleaver modes

QAM-C   J.83 Annex C

 

CONTROL

  • IP-address assignment  DHCP or static
  • Multicast support  IGMP v2
  • Device management  Browser based
  • Network management  SNMP v2c
  • Discovery  WS-Discovery

Additional information

Weight 2 lbs